Given the current popularity of laser shows in the wedding market, in order to minimize unnecessary damage caused by lasers to cameras, camera sensitive components such as CCD and CMOS,

The following points should be noted:

1. Set the normal camera to manually lower the gain, lower it to the lowest level under normal lighting, and then adjust it to normal after the laser performance is over;

2. For high-end cameras, all ND filters should be turned on to the maximum, the aperture should be adjusted to the minimum, and the shutter value should be increased;

3. The viewfinder should avoid laser emitters and emission ports, as there is too strong light there and the laser emission device cannot be seen in the LCD screen or viewfinder;

4. You can use flower channels and other materials as foreground blocking to directly shoot laser into the camera;

5. You can shoot from the side stand first, and then return to the main stand after the laser performance is over.